Innovative Brick Systems, LLC Installation Guide for the Versa Liner™ System:
Material:
1. Versa Liner™ brick embedment sheets. 2. Thin brick units TBX Quality, precision sized to + or -1/16” in length and width ( 7 5/8” brick units) with factory applied wax coating Installation tools and equipment: 1. Commercial wet tile saw with non-segmented tile cutting blade. 2. Band saw with fine tooth blade for trimming Versa Liner™ in stacks of 8 3. Utility knife or scissors, or mat cutter ( Logan model 650) 4. Pallet jack or fork lift 5. Basic carpentry tools for formwork assembly 6. High Pressure 3500 PSI Hot Water Machine (Landa 4000) 7. Concrete Vibrator with short pan head ( Wyco 750 SBI ), 2.5” long head. Phone 1-262-639-6770. Mock UP Panel 1. A jobsite mock up panel must be constructed to set quality control standards and demonstrate all material and workmanship performance capabilities. The mock up panel should approximate as closely as possible the typical panel configurations and workmanship techniques. Incorporate similar or the actual formwork, block outs, reveals, reinforcing elements, concrete mix design, vibration technique ( if necessary) and brick layout utilizing waxed brick, PSA, Brick release or the selected retarded slips. After casting the cleaning technique should be demonstrated using the prescribed jobsite or plant pressure washer.
Installation guide 5 1
Powered by FlippingBook