11625 Reed Court Broomfield, Colorado 80020
Replacing Thin Brick in Mbrick Panels
1. Using a 4” diamond cutting wheel cut along the long side of the damaged brick following the mortar joint. 2. Chip out the damaged brick taking out an additional 1/8” to ¼” of concrete to allow for the thin set material. 3. Apply a suitable thin set exterior mastic or glue to the back of the replacement brick and insert the brick in the pocket making sure the brick is properly aligned and flush with the face of the surrounding brick. 4. Once the setting material has cured use an appropriate grout to tool the joints around the replacement brick.
Any questions please call 1-800-413-4588www.mbrick.com
Powered by FlippingBook