UNIT MASONRY ASSEMBLIES 04810
Innovative Brick Systems, LLC 11625 Reed Ct.
Broomfield, CO 80020 Phone: (800) 413-4588 Phone: (720) 890-6032 Fax: (720) 890-6038
Info@mbrick.com www.mbrick.com
This MANU-SPEC® utilizes the Construction Specifications Institute (CSI) Manual of Practice , including MasterFormat ™, SectionFormat ™ and PageFormat ™. A MANU-SPEC is a manufacturer-specific proprietary product specification using the proprietary method of specifying applicable to project specifications and master guide specifications. Optional text is indicated by brackets [ ]; delete optional text in final copy of specification. Specifier Notes typically precede specification text; delete notes in final copy of specification. Trade/brand names with appropriate symbols typically are used in Specifier Notes; symbols are not used in specification text. Metric conversion, where used, is soft metric conversion. This MANU-SPEC specifies form liners for imbedding thin brick in concrete wall panels. These products are manufactured by Innovative Brick Systems, LLC. Revise MANU-SPEC section number and title below to suit project requirements, specification practices and section content. Refer to CSI MasterFormat ™ for other section numbers and titles.
SECTION 04810 UNIT MASONRY ASSEMBLIES
PART 1 GENERAL 1.01 SUMMARY
Specifier Note: Revise paragraphs below to suit project requirements.
A. Section Includes: Form liners for imbedding thin brick in concrete wall panels.
B. Related Sections:
1. Division 4 Section: Thin Brick.
Specifier Note: Article below may be omitted when specifying manufacturer's proprietary products and recommended installation. Retain Reference Article when specifying products and installation by an industry reference standard. If retained, list standard(s) referenced in this section. Indicate issuing authority name, acronym, standard designation and title. Establish policy for indicating edition date of standard referenced. Conditions of the Contract or Division 1 References Section may establish the edition date of standards. This article does not require compliance with standard, but is merely a listing of references used. Article below should list only those industry standards referenced in this section.
1.02 REFERENCES
A. ASTM International:
1. ASTM D256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics.
2. ASTM D638 Standard Test Method for Tensile Properties of Plastics.
Specifier Note: Article below includes submittal of relevant data to be furnished by Contractor before, during or after construction. Coordinate this article with Architect's and Contractor's duties and responsibilities in Conditions of the Contract and Division 1 Submittal Procedures Section.
1.03 SUBMITTALS
A. General: Submit listed submittals in accordance with Conditions of the Contract and Division 1 Submittal Procedures Section.
SPEC-DATA ® and MANU-SPEC ® are registered trademarks of Reed Elsevier Inc. The three part MANU-SPEC format conforms to the editorial style of the Construction Specifications Institute and is used with their permission. The manufacturer is responsible for technical accuracy. ©2006 Reed Construction Data. All Rights Reserved.
Powered by FlippingBook